Csi starter

Discussion in 'PSI Superchargers Tech Questions' started by GlennMc, May 16, 2011.

  1. GlennMc

    GlennMc New Member

    Joined:
    May 15, 2011
    Messages:
    7
    Likes Received:
    0
    Can you put 24 volts to a CSI Mini Starter?

    How about the solinod?

    Could someone send me a sketch on how to wire this 24 Volt?
     
    #1
    GlennMc, May 16, 2011
  2. craig moss

    craig moss Member

    Joined:
    Sep 29, 2006
    Messages:
    574
    Likes Received:
    6
    wire 2 12 volt's in series + - + - or 4 6 volts wired the same way. Never done it but seen it done several times they spin like hell
     
    #2
    craig moss, May 16, 2011
  3. GregM784

    GregM784 Member

    Joined:
    Aug 24, 2008
    Messages:
    915
    Likes Received:
    14
    I run my powerhouse starter on 24v. Done it for three years, and it works great. Starts a blown alcohol small block with a mag. Spins it about 300-400rpm i would guess.

    Here is a diagram showing both in series and in parallel.

    [​IMG]
     
    #3
    GregM784, May 16, 2011
  4. overkill69

    overkill69 Member

    Joined:
    May 17, 2005
    Messages:
    826
    Likes Received:
    0
    starter

    we use 12 volts to run the solenoid and everything else on the car.24v just to the starter. It doesn't really care just don't overheat/abuse it.
     
    #4
    overkill69, May 17, 2011

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM