Convertor drive oil type.

Discussion in 'PSI Superchargers Tech Questions' started by Force Fed, Aug 26, 2006.

  1. Force Fed

    Force Fed Member

    Joined:
    Dec 31, 2004
    Messages:
    61
    Likes Received:
    1
    What type of oil has anyone tried in their Lenco drive,Bruno or Quicker drives?
    Has any one tried any other grade of oil other than ATF 2D or ATF Dextron 3?
    I was looking at trying TD 10W -30 trans oil to see if helped with converter slip and temp.
    Alan
     
    #1
    Last edited: Aug 26, 2006
    Force Fed, Aug 26, 2006
  2. DQUES

    DQUES Member

    Joined:
    May 20, 2004
    Messages:
    650
    Likes Received:
    6
    Lenco says to use mobil1 synthetic in the lencodrive .
     
    #2
    DQUES, Aug 27, 2006
  3. Force Fed

    Force Fed Member

    Joined:
    Dec 31, 2004
    Messages:
    61
    Likes Received:
    1
    What grade Mobile 1 oil do they say to use?
     
    #3
    Force Fed, Aug 27, 2006
  4. Matt

    Matt Member

    Joined:
    Jun 25, 2006
    Messages:
    105
    Likes Received:
    1
    I've tried a few different fluids, fully syn motor cycle trans fluid 30 and 40 didn't help slippage, penrite 30 trans fluid, standard dextron 3 all ran basically the same. If you have excessive slip and heat your converter is the problem!
    I am using trans max Z made by castrol and it works fine and is basically the same fluid as mobil 1 syn ATF.
     
    #4
    Matt, Aug 27, 2006
  5. DQUES

    DQUES Member

    Joined:
    May 20, 2004
    Messages:
    650
    Likes Received:
    6
    Mobil 1 synthetic ATF , I forgot to specify ATF in my above post .
     
    #5
    DQUES, Aug 27, 2006
  6. Danny Humphreys

    Danny Humphreys Member

    Joined:
    Aug 4, 2003
    Messages:
    489
    Likes Received:
    0
    #6
    Danny Humphreys, Aug 27, 2006

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM