Comp cams new (Elite lifters)

Discussion in 'PSI Superchargers Tech Questions' started by Moparious Maximus, Mar 6, 2010.

  1. Moparious Maximus

    Moparious Maximus Member

    Joined:
    Feb 23, 2009
    Messages:
    401
    Likes Received:
    2
    Just wondering what people think of these new lifters, are they any good?

    We had their Endure-X lifters in there last year and I'm not happy with them at all. The tops break off and its not pretty.

    Im putting something else in next year just dont know what yet.
     
    #1
    Moparious Maximus, Mar 6, 2010
  2. Don Onimus

    Don Onimus New Member

    Joined:
    Feb 28, 2009
    Messages:
    1,337
    Likes Received:
    0
    lifters

    Quit using comp lifters years ago, when they started being made in Mexico.Don't know anything about now. But it all depends on how deep your pockets are. Good luck Don
     
    #2
    Don Onimus, Mar 6, 2010
  3. john348

    john348 Top Alcohol

    Joined:
    May 29, 2003
    Messages:
    1,348
    Likes Received:
    5
    Dont forget Crane is to be back in the lifter business sometime this month
     
    #3
    john348, Mar 6, 2010
  4. REEHL EQUIPMENT

    REEHL EQUIPMENT Authorized Merchant

    Joined:
    Mar 17, 2004
    Messages:
    1,009
    Likes Received:
    1
    ....and Cam effect are available now!

    >904, 1.00, and 1.062 for hemi in stock now!

    626 815-8815. Operators are standing by....M-F 9 to 5 PST.
     
    #4
    REEHL EQUIPMENT, Mar 7, 2010
  5. Lethal Threat Racing

    Lethal Threat Racing New Member

    Joined:
    Apr 18, 2004
    Messages:
    289
    Likes Received:
    0
    John, do you have any contact info the the new crane company?
     
    #5
    Lethal Threat Racing, Mar 7, 2010
  6. john348

    john348 Top Alcohol

    Joined:
    May 29, 2003
    Messages:
    1,348
    Likes Received:
    5
    #6
    john348, Mar 7, 2010
  7. bowtiewins

    bowtiewins New Member

    Joined:
    Feb 26, 2010
    Messages:
    7
    Likes Received:
    0
    I've had problems with comp cams lifters, too. I haven't had a problem with the tops breaking off, but I have had problems with the fork where the wheel sits spreading. Twice I've lost the wheel with diasterous results. I don't usually talk bad about manufacturers, but the last comp cams lifter wheel that came off cost me nearly $8k in engine damage. That particular lifter broke on the sixth run after installing a new brand new set. At this point, I would say any other roller lifter is going to be better than comp cams.
     
    #7
    bowtiewins, Mar 8, 2010

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM