Command Module

Discussion in 'PSI Superchargers Tech Questions' started by doug_ta, Nov 9, 2012.

  1. doug_ta

    doug_ta Member

    Joined:
    Nov 19, 2004
    Messages:
    78
    Likes Received:
    0
    Hi,

    Does anyone have a simple hookup diagram for a Electrimotion Command Module? I can't find one on their website (like they do for their other products), and I can't get a response from them.

    Thanks,
    Doug
     
    #1
    doug_ta, Nov 9, 2012
  2. underby6

    underby6 Active Member

    Joined:
    Sep 28, 2006
    Messages:
    1,189
    Likes Received:
    0
    Go to "Product Listing" and scroll down to the CM on the right. There is a small paper like icon that you can click (make sure you click for the CM not the 15Ch Timer); this will give you all the info you need. There is a DL for the software to edit the CM on PC and there is an "instruction sheet", I'd recommend viewing both, saving the software to your PC and printing the "instruction sheet" and putting it in your log book. You can email me at underby6@gmail.com if you have any other questions on it.

    Thanks,
    Brandon Booher
    NHRA TAD #34
     
    #2
    underby6, Nov 10, 2012

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM