Clutch in Parts Washer

Discussion in 'PSI Superchargers Tech Questions' started by Night Moves, Nov 3, 2013.

  1. Night Moves

    Night Moves New Member

    Joined:
    Jan 20, 2006
    Messages:
    120
    Likes Received:
    0
    Is there any reason I should not put the flywheel or pressure plate/ donut in the parts washer??

    Thanks
    ML
     
    #1
    Night Moves, Nov 3, 2013
  2. Mike Canter

    Mike Canter Top Dragster
    Staff Member

    Joined:
    Mar 10, 2004
    Messages:
    4,630
    Likes Received:
    189
    If the hat is all apart and you are going to clean and assemble it with anti-seize compound on all the pins then no problem. If the hat is assembled and not going to be taken apart then don't do it. Just blow it out with air

    Same thing at the track never use spray brake cleaner on the hat between rounds just blow with air. You do not want to wash out the anti-seize compound.
     
    #2
    Last edited: Nov 3, 2013
    Mike Canter, Nov 3, 2013
  3. Night Moves

    Night Moves New Member

    Joined:
    Jan 20, 2006
    Messages:
    120
    Likes Received:
    0
    Thanks!

    Thanks Mike,
    I really appreciate you quick response.

    I skipped the parts washer, I used a rag and an air hose to clean it up.

    ML
     
    #3
    Night Moves, Nov 5, 2013

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM