Clearing Out Shop

Pictures of below items at http://s1106.photobucket.com/user/Art_Trautman/library/For Sale Parts

UPDATED WITH WHAT HAS SOLD. TAKING OFFERS ON REMAINING


Venolia coated pistons 4.250 bore. 1620 C.H. with AJPE Rods, 1.150 pin 2.500 big end, 7.231 centers. There is a total of 27 pistons with rings 11 have never been run. Total of 23 rods 7 have never been run. Comes with several extra ring sets and about two dozen new and used rod bearings. All the used pieces are in good shape. $1,900

8 New and Coated 4.250 Bore Sleeves
Dimensions: .260 Register. 4.500 Top Step. 4.480 Step Above O ring. 4.400 Below O ring.
Center of O ring to top is 5.330. $50 each $300 for all 8.
Two hemi dry sump pans with windage trays, thick rails. $250 each. ONE HAS SOLD
Used Enderly Dual Mag drive with spare belts and support brackets. $500

Black billet Mag Clamps $60 ea. 1 left
Mag Hand cuffs $125.00.
Sitco dual mag drive was only used for half a season, less that 20 runs. $ 800
3 each 426 large journal cam shafts, have spec sheets $75.00 each. SOLD
1” roller lifters, 12pr good used and 8pr that need rebuild. $210 SOLD
Manton push rods, 7/16” dia 5/16” cup, std deck, 8-intake used, 7-exhaust used, 4- that need new ends, 8-exhaust new, 6-intake new. $175
Manton Push Rod Measure Kit, $20 SOLD
Used valves, Titanium Intake 13each 2.400, .342, Exhaust 15each 1.900 .342 .250 tip. One set of titanium retainers and locks. $320 SOLD
New Lash caps, 8 intake and 8 exhaust. $30 SOLD
New Valve Adjusters, 3/8” x 5/16” cup 16 new and 8 used. $30 SOLD
New Copper Head Gaskets, KB-BAE, Muscle Head 4.250 9/16” studs:
2pr .071 $90 per pr.
1pr .081 $90 per pr.
1pr .062 $75 per pr.
1pr .051 $75 per pr.
ATI Super Damper, made for A-Fuel recently rebuilt. $110 SOLD
RCD Hub to ATI Damper, 2each Aluminum 1each steel 1.135 thick $35ea. 2each Alumn .250 thick $15ea. Sold
Crank Trigger Degree Wheel, scrape marks on back side, $40 SOLD
Mallory Steel Mag Clamps, New, part # 26041A $70per pr.
MSD Cap, New, part # 7408 $30 each.
MSD Cable, New for 8168 $10 each
MSD Ignition Noise Filter, New part 8803 $25.
Respirators, North 7600, 5 each $60 each. SOLD
Chassis Stabilizer Pillow, $140 SOLD
Tire Scrubbers, $15per pr. SOLD
Pit Pal Front Dragster Tire Holder, $80per pr. SOLD
Push Rod & Lifter Holder, $45 SOLD
Piston Racks, $60 each.
Main Cap Puller, $35 SOLD
Valve Cover Tee Handles, $20 each. SOLD
System One Oil Filters, 2 canisters, 2 filters, 1 adapter, misc. O rings, $140 for all. SOLD
Aluminum Piston Ring Compressor, 4.250 2each $25 each.
Spark Plug Holder Tray, 2each $20 each. SOLD
Spark Plug Tee Handle, 2each $30 each. SOLD
Matco Torque Wrenches,½” drive 25-250# 2 each $150 each. 3/8” drive 10-100# 1ea $95.
PortaTree Practice Tree, with foot pedal and thumb button. $100. SOLD
Flaming River Timing Light, $45. SOLD
Nitro Test Kit 94%, Complete kit with chart, thermometer has slight damage of plastic from contact with nitro but works fine. $200.00
Idle bypass check valves and Y block, $90. sold
Shut off Valve, $60.00
Piston Ring File, $30.00
Drive Shaft Coupler, $80
Fuel Rails with Jumper Lines, 16 Complete Down Nozzles, Fuel rails for Fat/Muscle heads complete with jumper lines. Fuel Rails $350. 16 Down Nozzles $200.
Head Studs, 14ea new 11" O.A. 19ea used 12-1/4" O.A. 22ea 10-3/4" O.A. 2 10-3/4" O.A.
and 1 new 8-3/4" O.A. 9/16" studs, $240. SOLD
KB Front Cover, with cam gear and hex pump drive, raised cam, $120. SOLD
RCD Starter Cage and Handle, $95. SOLD
Clutch Alignment Tool 10 spline 1-3/4", $50.
CO2 Bottle, $30. Sold
KB Sleeve Puller, 4.250 bore, $140.


Can Take Credit Cards, All prices are plus shipping.

Art 623-570-2489
artworkphx@cox.net

 

hi!
you've got an e-mail

 

Sent email

 

I'll take the spark plug trays, sent you a reply email

 

clutch tool

Hi Art. email sent

 

Bump to the top