caster and camber

Discussion in 'PSI Superchargers Tech Questions' started by dutra, Nov 25, 2015.

  1. dutra

    dutra Member

    Joined:
    Mar 16, 2013
    Messages:
    39
    Likes Received:
    0
    What caster and camber angle is normal in a FC chassis
     
    #1
    dutra, Nov 25, 2015
  2. afueldigger

    afueldigger tire wiper

    Joined:
    Mar 14, 2004
    Messages:
    198
    Likes Received:
    0
    I like to see between 9 to 11 degrees caster
    Camber set to zero
     
    #2
    afueldigger, Nov 26, 2015
  3. Comax Racing

    Comax Racing Member

    Joined:
    Sep 20, 2006
    Messages:
    673
    Likes Received:
    7
    Just broke out my funnycar/altered chassis drawings and all of them call for 10 Deg caster
     
    #3
    Comax Racing, Nov 27, 2015
  4. Bob Meyer

    Bob Meyer Comp Eliminator

    Joined:
    May 13, 2003
    Messages:
    766
    Likes Received:
    39
    Half of handling equation is caster and camber = 8* and 0*.

    The other half is 3/16" toe in and proper tire pressure to the manufacturer's spec, usually 45-50 psi. (Not a daily driver 32) and tight rod ends.
     
    #4
    Bob Meyer, Nov 27, 2015
  5. dutra

    dutra Member

    Joined:
    Mar 16, 2013
    Messages:
    39
    Likes Received:
    0
    Thanks! At the moment I measure 8 on one side and 13 on the other side. :)
     
    #5
    dutra, Dec 3, 2015

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM