Carbon Fibre Bucket/Diaper

Discussion in 'PSI Superchargers Tech Questions' started by TOL, Jul 1, 2007.

  1. TOL

    TOL Active Member

    Joined:
    May 18, 2005
    Messages:
    1,352
    Likes Received:
    18
    Who makes these? Does anyone make custom sizes & shapes? How wide are they typically versus the pan and lower extremeties of the block (ie: how much wider & taller than the pan)? Do you still run absorbent pads inside?


    Have a new Stroud that's all droopy/saggy to work with. Before we resort to a belly pan (to keep the diaper up out of the lights), we thought we would explore the carbon fibre option. Also, could a person make their own 'Bucket' out of alternate materials, and still be compliant?
     
    #1
    Last edited: Jul 1, 2007
  2. underby6

    underby6 Active Member

    Joined:
    Sep 28, 2006
    Messages:
    1,189
    Likes Received:
    0
    Spitzer makes them and they are super nice. I'm pretty sure they're made to fit, so you'd need to call Mike or Brent to find out the exact specs. I'm pretty sure you can fab. them out of aluminum and still be legal. The carbon certainly does look nicer and much stronger.

    Brandon Booher
     
    #2
  3. RBS

    RBS Authorized Merchant

    Joined:
    May 6, 2004
    Messages:
    1,095
    Likes Received:
    0
    Bucket

    WE ARE A DEALER FOR DJ SAFETY IF YOU WANT TO SEE PICS LOOK UNDER BLOWER RESTRAINTS AT WWW.RBSSUPERCHARGERS.COM WE TYPICALLY FAX OR EMAIL OVER A ORDER SHEET WHEN PLACING AN ORDER FOR ONE OF THESE THAT COVER SEVEARAL AREAS OF MEASUREMENTS AND CLARIFICATION. IF YOU LIKE YOU CAN CALL 530-292-3368 OR CALL DJ 323-221-0000 AND ASK FOR JOE OR JENNIFER IF YOU HAVE CERTAIN QUESTIONS WE AGREE THESE ARE NICE TO PLACE UP UNDER THE ENGINE.
     
    #3
  4. Tim Stevens

    Joined:
    May 18, 2004
    Messages:
    240
    Likes Received:
    0
    Not trying to steal any business (as we are a DJ dealer also) but just want to "plug" them also! Joe is super to work with and EVERYTHING fits nice. We recently had a very custom blanket made for a customer with a Bruno/Lenco that fit PERFECT! ;)
     
    #4
  5. TOL

    TOL Active Member

    Joined:
    May 18, 2005
    Messages:
    1,352
    Likes Received:
    18
    Thanks guys. I spoke with both Joe & Jennifer today. Very helpful people. No more fighting with a floppy diaper!
     
    #5

Share This Page