Brake Master

Discussion in 'PSI Superchargers Tech Questions' started by Dale H., Sep 11, 2006.

  1. Dale H.

    Dale H. Member

    Joined:
    Dec 7, 2005
    Messages:
    302
    Likes Received:
    5
    What master cylinder do most funny cars use?A dual outlet,or single with a proportioning valve to the front brakes? What brands?

    Thanks Dale:confused:
     
    #1
    Dale H., Sep 11, 2006
  2. shawn davis

    shawn davis Member

    Joined:
    Feb 27, 2004
    Messages:
    658
    Likes Received:
    0
    Master

    Cnc Makes A Nice Aluminum Master, With Two Outlets
    Check Chassis Sop.com
     
    #2
    shawn davis, Sep 12, 2006
  3. shawn davis

    shawn davis Member

    Joined:
    Feb 27, 2004
    Messages:
    658
    Likes Received:
    0
    Master

    That Should Be Chassis Shop.com
     
    #3
    shawn davis, Sep 12, 2006
  4. john 111

    john 111 New Member

    Joined:
    Jan 11, 2006
    Messages:
    39
    Likes Received:
    0
    I use the cnc double piston with a single fluid tank, but if I were to do it again,I would use a duel tank type so if there was a leak or blown line,I wouldnt lose all fluid/brakes like I would with this set up..........John
     
    #4
    john 111, Sep 12, 2006
  5. Jeffd

    Jeffd New Member

    Joined:
    May 14, 2006
    Messages:
    24
    Likes Received:
    0
    To be legal you have to have a dual cylinder.
     
    #5
    Jeffd, Sep 12, 2006

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM