Blower Pulley

Discussion in 'PSI Superchargers Tech Questions' started by ThrowdOff, Jan 29, 2015.

  1. ThrowdOff

    ThrowdOff New Member

    Joined:
    Sep 26, 2012
    Messages:
    20
    Likes Received:
    0
    Has anyone ever turned blower pulley around instead of using longer snout?
     
    #1
    ThrowdOff, Jan 29, 2015
  2. jay70cuda

    jay70cuda Well-Known Member

    Joined:
    Sep 30, 2009
    Messages:
    1,139
    Likes Received:
    35
    Yes did it on the dyno. Took the bearing and seal
    Out in less than 5 pulls. Started leaking after first pull. Don't do it. Buy spacers or a offset pulley. Or buy a snout. Turning it around will just tear shit up
     
    #2
    jay70cuda, Jan 29, 2015
  3. ThrowdOff

    ThrowdOff New Member

    Joined:
    Sep 26, 2012
    Messages:
    20
    Likes Received:
    0
    Thanks, talked to Littlefield today and that is same thing they said. Will be looking for used 10" snout now.
     
    #3
    ThrowdOff, Jan 29, 2015
  4. WIZBANG

    WIZBANG Member

    Joined:
    Nov 8, 2004
    Messages:
    761
    Likes Received:
    2
    NitroStacker might have a snout ?
     
    #4
    WIZBANG, Jan 30, 2015
  5. Policy Peddler

    Policy Peddler Member

    Joined:
    Oct 12, 2005
    Messages:
    200
    Likes Received:
    4
    backwards pully

    Yes, ran it that way for several years, it did eventually take out the bearings. I am thinking I even had a spacer with it!
     
    #5
    Policy Peddler, Feb 15, 2015

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM