Billet Crankshaft

Anyone using a billet crankshaft from Ohio Crankshft?
What stroke is it?
How long have you had it?
How many runs?

 

I have three in service now for BBC. The stroke is 4.25". Two of the applications are blown--one 496 with an 8-71 straight in a dragster and one 540 with a 14-71 HH in a minirod puller. The other is a 496 NA on alcohol in a minirod puller. The NA is two year's old. The 540 has one season of pulling (probably 20 or so passes--remembr these are 12 to 15 seconds WOT). The 496 only has start up time. Knock on a big piece of wood, no problems yet. Stan and his staff are really good people to work with and no this is not a paid advertisement, just my experience. JW

 

Prowlin, what I would do is look up past post on here you might be very suprized, I don't wanna say either way but you can put your money on Bryant and most ta/d owners will say the same thing bryant is one of if not the best...Dave

 

Ohio crank

John, i ran one in the chevy motor for 3 years and it's still in good shape.