Belts, Fuel Pumps, Lenco Ratio's, MSD Ignition, Electrimotion and More

Discussion in 'Noonan Classifieds' started by Snapcase, Jul 12, 2014.

  1. Snapcase

    Snapcase Authorized Merchant

    Joined:
    Oct 10, 2008
    Messages:
    858
    Likes Received:
    4
    (2) Used 14 MM 1568-65-GT Carbon 112 Tooth Blower Belts (25 Runs) $150.00 Each
    (1) New 14 MM 1568-65-GT Carbon 112 Tooth Blower Belt $230.00
    (1) New 14 MM 1568-75-GT PS 112 Tooth Blower Belt $275.00

    (2) Used MSD 8147 Pro Mag 44 Points Box $400.00

    (1) Used MSD 8142 Pro Mag 44 Coil $300.00

    (1) New MSD 8973 Mag Controller with Hand held programmer $350.00

    (1) New Electrimotion Command Module (Transbrake Activation). Controls Timing Curve, Fuel Mgt, and Auto shifting $1750.00

    (1) New Electrimotion 15 Channel Dual Start (Clutch Activation) Timer $500.00

    (1) New Pro Mag 44 Standard Cap and Rotor $25.00

    (1) Used Waterman Little Bertha Fuel Pump 19.9 Gallons at 8000 engine rpm with Shut off, Pump Loop, 1 1/4 Inlet, 3/8 Hex Drive $1,000.00

    (1) Used Waterman Dual Mini 17 Gallon Pump with Shut off, 1 1/4 inlet, 3/8 Hex Drive $1,000.00

    (1) Used Lenco CS3 Ratio's 1.20, 1.22, 1.29 Complete with Clutch Packs and Ring Gear (no case bearing) $750.00 each

    (1) Used Hemi Port Line set Rubber 500 Psi line with 90 deg ends, Enderle Long Brass Nozzle bodies, Enderle Port distro block with -8 Port poppit and Carbon -8 Aeroquip feed line $220.00

    (1) Used Standard BBC Port Line set. 90 deg ends, Enderle Port Distro block (no Poppit) $150.00

    (1) Used 14-71 Roots 2 inch Aluminum Set Back Plate Delta Opening 1/2 Thick $150.00

    (36) New Ft .250 Virgin Half Round Teflon with (4) 1.312 K-11 Rotor Seals $150.00

    (1) New PSI Screw Blower Lower Distribution / Restraint Plate with O-Ring Cord (stock config) for C or D Rotor $250.00

    (1) New 4.77 Pro Gear 9 Inch Richmond Ring and Pinion $100.00

    (67) Used MSD 6 Shooter Chips 15-1 Deg Retard Value (random count) with (1) 35 Place Billet holder $50.00

    (1) Used Quick Release Fuel Pump Clamp $30.00

    (5) Used BAE Stg 5 1.7 Ratio Intake Rocker Arm with 3/8 x 5/16 Adjustors $40.00 Each

    (4) Used BAE Stg 5 1.58 Ratio Exhaust Rocker Arm with 3/8 X 5/16 Adjustors $130.00 Each


    Pics available for all Parts


    Call Jon Salemi at Resolution Racing Services 716-832-7583 or email jon@resolutionracing.com
     
    #1
  2. WIZBANG

    WIZBANG Member

    Joined:
    Nov 8, 2004
    Messages:
    761
    Likes Received:
    2
    You have a PM !
     
    #2

Share This Page