Barrel Valve choices

Discussion in 'PSI Superchargers Tech Questions' started by frank70, Feb 17, 2018.

  1. frank70

    frank70 NOSTALGIA DRAGSTER

    Joined:
    Aug 22, 2007
    Messages:
    234
    Likes Received:
    1
    Pros, cons, suggestions for which barrel valve to use and the benefits Gorr, Johnny West, Enderle Barrel valve for blown nitro?
     
    #1
    Last edited: Feb 18, 2018
    frank70, Feb 17, 2018
  2. a/fd slngsht

    a/fd slngsht Member

    Joined:
    Dec 2, 2004
    Messages:
    314
    Likes Received:
    3
    Injected nitro, the automan piece is very user friendly.. ( it's the enderle mvv with some refinements) I'd also recommend bobs auxiliary idle metering set up with it...
    also, some very fast cars run the billet pete Jackson piece as well
     
    #2
    a/fd slngsht, Feb 18, 2018
  3. Mike Canter

    Mike Canter Top Dragster
    Staff Member

    Joined:
    Mar 10, 2004
    Messages:
    4,630
    Likes Received:
    189
    If you use an Enderle BV then make sure it is the high flow version for nitro
     
    #3
    Mike Canter, Feb 19, 2018
  4. frank70

    frank70 NOSTALGIA DRAGSTER

    Joined:
    Aug 22, 2007
    Messages:
    234
    Likes Received:
    1
    How can you tell the difference between the 2 mike, is it in the spool or the actual design internally?
     
    #4
    frank70, Feb 19, 2018
  5. Mike Canter

    Mike Canter Top Dragster
    Staff Member

    Joined:
    Mar 10, 2004
    Messages:
    4,630
    Likes Received:
    189
    #5
    Mike Canter, Feb 19, 2018

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM