BAE #6, Coan, Chance NSX, Lenco Drive, Browell, Boninfante

Discussion in 'Noonan Classifieds' started by Tony Johnson, Dec 17, 2015.

  1. Tony Johnson

    Tony Johnson Member

    Joined:
    Feb 4, 2006
    Messages:
    71
    Likes Received:
    0
    BAE #6 heads - valves, locks, retainers, springs and lash locs have less than 20 runs SOLD
    BAE rocker set-up with Manton intakes, red stands SOLD
    Heads and rockers for $6,000, comes with a set of JE pistons 4.467 with less than 20 runs SOLD

    Neal Chance NSX 10" billet converter for Lenco drive and blower motor, 7 runs, $4,000 excellent cond. SOLD

    Coan 265mm billet converter for Lenco and blower motor, 3 runs, $3,800 excellent cond.

    Neal Chance NSX Big Bore Lock-up converter for nitrous car, 7 runs, $5,500. Pictures will be added this weekend.

    Lenco Drive 3-speed with browell bell housing for hemi, $7,000 SOLD

    Boninfante titanium 7.200 bell housing for chevy with Bruno, 7 runs, $2,800 excellent cond. Pictures will be added to drop box this weekend.

    I have all of the pictures on DropBox
    email TJohnson@CentralFire.net for the link if the one below does not work.
    Tony Johnson 678-480-4641 cell

    https://www.dropbox.com/sh/oyv0ur1phes6mr8/AABXift58aMXGNmkQ1evJCp7a?dl=0
     
    #1
    Last edited: Dec 22, 2015
    Tony Johnson, Dec 17, 2015
  2. bruce mullins

    bruce mullins Top Dragster

    Joined:
    Aug 2, 2003
    Messages:
    1,002
    Likes Received:
    5
    what pump and stator in the 10 inch billet chance?
     
    #2
    bruce mullins, Dec 17, 2015
  3. Tony Johnson

    Tony Johnson Member

    Joined:
    Feb 4, 2006
    Messages:
    71
    Likes Received:
    0
    R15 and 32 stator. I just bought it at the end of the season.

    I'll sell the Lenco Drive, Browell Bell housing and Chance converter as a package for $10,000. I just change the Lenco to the mega shaft. The pump, face plate, transbreak clutches, input shaft and stator support have 7 runs on them and cost right at $3,000. The converter was $5300 new. Trying to get money for a new set of heads.
     
    #3
    Tony Johnson, Dec 18, 2015
  4. blown1969camaro

    blown1969camaro Member

    Joined:
    Apr 18, 2010
    Messages:
    455
    Likes Received:
    2
    what pump and startor on 265 coan
     
    #4
    blown1969camaro, Dec 18, 2015
  5. Tony Johnson

    Tony Johnson Member

    Joined:
    Feb 4, 2006
    Messages:
    71
    Likes Received:
    0
    #1 pump and 375 stator. I have numerous stator, just about everyone they make (35, 375, 425, 450, 475 & 50). I can change the stator or sell you additional stators at $150 each. Let me know what you prefer and I'll make sure I have it.

    I also have (2) with steel pump cover and aluminum front cover. One is a #1 pump and the other is a #2 pump. $1500 each.
     
    #5
    Tony Johnson, Dec 18, 2015
  6. blownapex

    blownapex Member

    Joined:
    May 25, 2006
    Messages:
    507
    Likes Received:
    4
    what ratios on the lenco drive
    do you have the other air pod and gear set
     
    #6
    blownapex, Dec 19, 2015
  7. Tony Johnson

    Tony Johnson Member

    Joined:
    Feb 4, 2006
    Messages:
    71
    Likes Received:
    0
    I'll check but I believe I have a 1.28, 1.31, 1.35, 1.41 & 1.50

    I can get what you need on trade with Mick Snyder.

    Yes, I have everything for the 3-speed. I ran it as a 2-speed this year.
     
    #7
    Tony Johnson, Dec 20, 2015
  8. Tony Johnson

    Tony Johnson Member

    Joined:
    Feb 4, 2006
    Messages:
    71
    Likes Received:
    0
    Parts are going quick. I have the Titanium bell, Chance Lockup converter and Coan Billet converter left.
     
    #8
    Tony Johnson, Dec 22, 2015

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM