B&J end play check

Discussion in 'PSI Superchargers Tech Questions' started by aafa760, Oct 25, 2017.

  1. aafa760

    aafa760 Member

    Joined:
    Jul 13, 2010
    Messages:
    102
    Likes Received:
    4
    B& J three Speed
    How do I check the end play for each unit?
    Will call Mike later today he is headed to Vegas,
    I have the Clutch pack checking diagrams. and the parts diagrams.

    Converting to Three Speed B&J from Lenco 2 Speed.

    Thanks for the time
    Bryan
     
    #1
    aafa760, Oct 25, 2017
  2. Will Hanna

    Will Hanna We put the 'inside' in Top Alcohol
    Staff Member

    Joined:
    May 6, 2003
    Messages:
    6,706
    Likes Received:
    133
    The way I was taught was to put a big set of vice grips on the shaft and pull the fill or drain plug out to watch the clutch drum. I think .010-.015 is the spec, which is basically enough to say you have some end play. It is adjusted by adding or subtracting shims on top of the sprag race.
     
    #2
    Will Hanna, Oct 25, 2017
  3. aafa760

    aafa760 Member

    Joined:
    Jul 13, 2010
    Messages:
    102
    Likes Received:
    4
    Thanks Will
     
    #3
    aafa760, Oct 26, 2017
  4. Ian Gellately

    Ian Gellately New Member

    Joined:
    Sep 16, 2017
    Messages:
    12
    Likes Received:
    0
    Sean Brown makes a tool for holding a dial indicator you check the clearance before you put the next planetary on I have pic and specs if you need
     
    #4
    Ian Gellately, Oct 27, 2017

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM