496 BAE fuel motor, SSI, carbon Injector hat, Titanium can, cannon, Body

Discussion in 'Noonan Classifieds' started by Will Hanna, Apr 30, 2014.

  1. Will Hanna

    Will Hanna We put the 'inside' in Top Alcohol
    Staff Member

    Joined:
    May 6, 2003
    Messages:
    6,706
    Likes Received:
    132
    edit

    Complete manifold to pan 496 ci BAE 4.187 Forged block std. deck, BAE Billet Fuel heads std. deck with 1 piece hoops, AJ Intake std. position, titanium Intake, Inconel Exhaust, AJ red stands, Stage 5 roller intake, Clough Exhaust, 4.5 splined Bryant crank in great shape, New C&A Rods, Nitro pistons with 1.156” pins, new rings, new bearings, RCD timing cover & timing gear assemble, RCD pump extension, dry sump oil pan, system 1 dry sump oil pump, nitro cam & 1” lifters and thick wall push rods. $20,000.
    This is a proven combo that you can either run on Nitro or low comp for alcohol or put in some high comp pistons to get some more power on alcohol. High comp pistons go for around $1200. The engine is in pieces for inspection but can be assembled for freighting or ready to run, costs vary.

    Also available:
    Titanium Dual plug hemi valve covers $3000
    D rotor SSI 14/71 Mag case rear gear with snout for $3000
    Carbon fiber injector hat (short) $1800
    8 5/8 Titanium bell housing with McKinney adjustable pedal (needs recert) $2500
    2002 Firebird Carbon Funny car body, some cracks but repairable $3000
    Clutch cannon $1000
    Several other misc. parts, all prices in US dollar, shipping and handling paid by buyer.

    Also looking for 3 x C & D rotor SSI 14/71 casings

    Email Mathew at nitrorat@comcast.net or call 801.953.4145
     
    #1
  2. Mathew

    Mathew AA/FA

    Joined:
    Jul 11, 2007
    Messages:
    325
    Likes Received:
    2
    Bump

    Bump

    All this stuff and more must go.
     
    #2
  3. Mathew

    Mathew AA/FA

    Joined:
    Jul 11, 2007
    Messages:
    325
    Likes Received:
    2
    Bump

    Bump.

    Prices are negotiable.
    Injector hat is sold.
     
    #3
  4. Mathew

    Mathew AA/FA

    Joined:
    Jul 11, 2007
    Messages:
    325
    Likes Received:
    2
    Bump

    These parts have to go so don't hesitate to call or email.
    Mathew
    801.953.4145
    nitrorat@comcast.net
     
    #4
  5. Mathew

    Mathew AA/FA

    Joined:
    Jul 11, 2007
    Messages:
    325
    Likes Received:
    2
    #5
  6. Mathew

    Mathew AA/FA

    Joined:
    Jul 11, 2007
    Messages:
    325
    Likes Received:
    2
    Bump- Need to get rid of these parts.

    Bump

    Call if you have any questions, parts must go.

    Mathew
    801.953.4145
    nitrorat@comcast.net
     
    #6
  7. 40slammer

    40slammer New Member

    Joined:
    Apr 11, 2005
    Messages:
    7
    Likes Received:
    0
    How much $

    Hey Mathew, hear you have a complete roller also . Details & How much for roller and or complete turn key car ?
     
    #7
  8. Mathew

    Mathew AA/FA

    Joined:
    Jul 11, 2007
    Messages:
    325
    Likes Received:
    2
    Turn key car

    The complete turn key 2002 Firebird Mckinney chassis Nitro Funny car is $48,000

    Johnny Gray had this car built then Keith Jackson drove it for J4 Racing.
    The chassis will cert to all classes except modern day Nitro Funny car. The chassis could be upgraded to suit though.
    It is a complete turn key Nitro Funny car except for an injector hat, the ignition system and valve covers.
    Comes with a 14/71 SSI D rotor, 2 sets of BAE BIllet std deck Fuel heads with Titanium intake, inconel exhaust and titanium valve springs(2 complete & 2 bare). Red stands, Stage V intake and Clough exhaust.
    80 Gallon Rage fuel pump, dual mag drive, Bryant splined crank, forged BAE std deck block, new rods, new bearings, new rings, used but good fuel pistons, dry sump pump, nitro clutch, titanium clutch can with adjustable pedal, spare used discs, spare used floaters, 2 cannons, 2 reversers, headers, 12" Strange rear end with 3.2 gears & a new set of 3.5 gears, 2 firebird bodies, BDK valve, variable fuel or clutch jet system, pill fuel or clutch jet system and Racepak data logger with flow meters. There is other misc stuff but will take forever to list.

    Mathew Leonard
    801.953.4145
    nitrorat@comcast.net
     
    #8
  9. Mathew

    Mathew AA/FA

    Joined:
    Jul 11, 2007
    Messages:
    325
    Likes Received:
    2
    Bump

    Bump- Need to move these parts.
     
    #9
  10. Mathew

    Mathew AA/FA

    Joined:
    Jul 11, 2007
    Messages:
    325
    Likes Received:
    2
    Bump- Need to get rid of these parts.

    These parts need to go. Call on prices as I can't edit the original.

    Mathew
    801.953.4145
    nitrorat@comcast.net
     
    #10
  11. Mathew

    Mathew AA/FA

    Joined:
    Jul 11, 2007
    Messages:
    325
    Likes Received:
    2
    Parts still available

    Parts that are still available

    Rolling funny car
    BAE Forged block
    4.5 cranks
    Reversers
    Titanium Clutch can 8 5/8
    cannons
    Fuel management system
    Clutch management system
    Rockers set- stage 5 intake, clough ex, red stands
    BDK valve
    02 Firebird body


    SOLD
    Injector hat
    Heads
    44 Amp Pro Mags
    Valve covers
     
    #11

Share This Page