481X manifold sealing.

Discussion in 'PSI Superchargers Tech Questions' started by MKR-588, Jul 19, 2012.

  1. MKR-588

    MKR-588 Member

    Joined:
    May 2, 2008
    Messages:
    148
    Likes Received:
    0
    Just putting together a 481X & noticed that the manifold is sealed around the ports only with "O" rings. Do you get any oil leaking between the ports or between the manifold rubber seal & the ports? Do you guys use any sealer between the O Rings?
     
    #1
    MKR-588, Jul 19, 2012
  2. rb0804

    rb0804 Active Member

    Joined:
    Aug 7, 2010
    Messages:
    671
    Likes Received:
    38
    Nothing on the orings except a little Vaseline if they are new and don't want to stay in their grooves. If you have too large of a gap at the ends, AJ sells some high density foam you can glue in there.
     
    #2
    rb0804, Jul 22, 2012

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM