Separate names with a comma.
Bent rim?? I'll have them looked at. Thanks
Had drive line checked for balance and if bent. Came back was bent. Had straighten and balanced. Looked car over for any possible problems. Got...
Trans is a Mikes Monster glide. Trans just freshen and torque converter looked at and checked for balance. Thinks, going to have driven shaft...
Have Auto trans and tried putting neutral, did not work, at those speeds the trans drove thru and continued to drive engine
Have a Pro Mod with a 526 Hemi, 14/71 blower, etc. We now race 1/8 mile and I have a problem during shut down. Finish line out of throttle, with...
Got hold of RBS and they sent me the sketch for pluming the oil filter. Bottom is IN from filter and top is OUT to the filter. Thank you.
Where you have the stainless U pipe is where I have the filter installed. That's why I need to know OUT to the filter and IN from the filter. Like...
Need to know which fittings from the pump go to remote filter. Looking at the pump from front of car there are two fittings one is higher then the...
I have a JP 1 block and all of my work is performed by Jay Roach: J&S East valley Garage 1610 Easy Valley Road Santa Barbara, CA 93108 (805)...
They way I have it: Top of the oil pump goes to the outside of the filter and bottom of the oil pump goes to center of the filter. Been working...
4.310 sleeves Sent you a PM TX's, Mack
Powerglide Mikes Transmission. Been using his powerglides for more than 10 years. Makes one of the best in the world....
Overkill69, My ProMod came with two Optima 12 volt batteries mounted in the back of the car. I removed these batteries to save weight and had...
Spring Pressure Noel, But, why are the lifter body’s distorting? Are the valves floating? Is a rule of thumb 300 lbs on the seat? I had a...
Stainless cracking Yes stainless steel will crack when exposed to vibration. Of course this is true with most metals. Here’s a track you mite...
Hay Mike, Did you ever find/recover the pictures of the plugs so we can see what they are suppose to look like according to you article?...
Thanks Jim and Norm!!! Chris (was that Bernie Longjohn from LACR/Palmdale who was running the show?) Yes, he's back. Heard he was working on...
cold here to Hey, you are all lucky. Al Gore says we’re in global warming.
Hat Jets Thanks Mike. Do you use large jets on the lines going into the rear of the blower and a larger jet in the right side verses the left...
Putting a new hat onto my high helix, retro roots blower and I noticed the jet size decreased front to back (car application, not boat). Read the...