Separate names with a comma.
Like new condition, just rebuild, new ceramic bearing, band, pump, deep steffs pan etc. Many spare parts, pump, drum, bands, gasket/oring sets...
Do you have a catch can (1 qt) mounted as high as you can in the car. I like to have have it drain back into the pan and you dont have to worry...
Where is it blowing fluid out from ? The pump seal maybe
TTT
tt
12v22.5 sold
12v22.5 20v35 10v22
Fine spline ratios with ring, planetary and sun gears 37% 44% 50%
I would update the rocker shafts to the heavier wall from BAE. After we updated to these shaft alot a problems went away. The heavy wall shafts...
Has anyone tried the normal 4 magnet (90 degrees apart) trigger wheels and compared to the later style 60-2 or similar.
Looking for a late PSI D rotor blower alone or with restraint, low profile carbon hat, belt guard. Let me know whats available
Have a look at wiggins clamps, they are great
I do all my torque wrenches every year. The normal calibration points are minimum setting, 60 % and max setting. The only one that is more than...
I have found the best and cheapest way is through a freight forwarder. They pick whatever is the best choice for your needs in terms of delivery...
pm sent
When you have it apart you should also measure the pump gear depth, new 0.0035 in, and double check the oil feed line for leaks and cracks in the...
If you are loose on the converter to flex plate clearance that will also cause a low pressure range. You can turn it up and down but not high...
I have tried a couple of different types of gas. Race gas seems to hold up longer in the squirt bottle. we just keep a gallon or so in the trailer...
I would try to get 1 in minimum if you can.