Separate names with a comma.
when i picked up my motor from mike stawicki last season,he told me something i always remember. "everything in the motor is new & is getting to...
brad penn nitro 70 here.we dont change weights.
this is pretty funny to see this thread.i was at mike stawicki's shop today & was schooled pretty well on dynos & different types.i would give...
our veney heads already had the holes when we bought the motor.we use a 1/4 20 bolt,1/4 inch long w a little blue loctite for good measure....
we made one harness with 10 gauge wire & soldered d-rings.runs from cyl head to cyl head to coil ground.also have main ground from battery lug at...
hyatt racing services number. 440-463-2686
Time to do the winter freshen.our existing crank has previously been repaired.am going to replace with a new unit & keep this one as a spare.motor...
ran into the same issue .found my liner wheels did not have any sfi tags any longer.contact HYATT racing services in ohio,they are near thompson...
At the track yesterday.discussion came up which has less weight/rolling mass , liner wheel or a dbl beadlock wheel ? We currently have liners....
we will be at thompson for asphalt wars on the 28th.one track we have never been to.
after a year of building this thing,we tested at norwalk yesterday.first pass,4.17 at 173 in the eighth. 2nd pass,4.0 at 183 . had a best 60 ft at...
i messed this up twice before i got it right.first i plumbed it straight to the upper distribution block & when the engine ran on the waterman...
i bought the primer kit from good vibes.plumbed it into the distribution block for the hat lines.bought a holley blue pump & had speedwire put a...
I hope i spelled your last name right joe.we bought our racepak v300sd directly from racepak/todd payton last winter for a new build.while...
i see what you were referring to.i should of clicked through their tools.sorry about that.looks like it is what i am looking for.will call them in...
thankyou for the posts.i have one of the lsm style for when the head is off.i am looking for one to use while the head is still on the block.i...
want to be able to change my springs with the head still on the motor if needed.rbs has an on head spring changer but does not list it for use on...
not to sound stupid here but what do you mean by dead stick it ? i assume you mean to basically foot brake the thing.not sure how it could be...
finally finished the new car,275 boss slipjoint,stawicki kb w veney big valve heads,ssi 16-71.abruzzi/jw ultrabell glide,abruzzi 10 inch...
thanx for the answers,i wasnt sure if it was correct but it is. thanx again everybody.
