Separate names with a comma.
Hi, have three KB stage 3 blocks. They always had have a freeze plug in, never have had a problem.
Hi, we use them with a shift pressure of 300psi without any trouble the last two years.
Hi, pump inlet to the firewall goes to pan, the middle inlet font of car goes to pan, upper and lower inlet goes to oil filter
Hi, think I have a set (8 ) of them here in Europa. Send me an E-Mail to annechie@web.de. I will send you some Pictures if These are the right...
HI Tony, this is Frank. I bought the Borgward Isabella. The Isabella is back on track. Your old E-Mail adress isn't working anymore. Could you...
Thanks Mike for answer, I will check the things. Good luck with Adam at the races!! Frank
Hi, I will run an older ProMod chassis in DYO classes. Engine is a KB 526, Brad fuel heads, 14/71 HHR, 6" set back, 30% over, makes 31lbs at...
Thanks everybody for help!!!
Hi, what is the max. bore on KB sleeves in a KB stageVII water block for a blown engine. ( 14/71 HH, around 25 psi, fuel heads, 10.8:1 com., 4.375...
Hi, 1050,-$ for a set of billet rods, 1250,-$ for a set of forged rods.
Copy Hi, I would like to have a copy, please. E-mail: annechie@gmx.de Thankx!!
Quick Data Hi, have a Quick Data for seven years without any problems, KB 526, 14/71 HH Little. Mounted inside, passenger position.
Hi, we run brooks B2 in our 526 Hemi combo (4.375/4.375, 14/71 HHR, converter door car, std. cam location). We grind the rods like you. We never...
Lenco Hi, always go back in third, its easier on the trans and brake. It needs a little practice with the brake and transbrakebutton (don't know...
Hi, i store a old KB stage VI block. Block is in good shape, but the deck is milled down half a inch. Is there a company who makes a blower...
Hi, KB stage V heads and Brad III heads, both 175cc, work without problems on the valve train.
Hi, ask Tony at tony@us-transmissons.com , he runs KB's with B&J Quick Drive phone 303 521 8750
Hi, first sorry for my bad english. I want to know what valve guide clearance i should run in a blown alky engine (KB 543, 14/71HH Little.) I've...
Look for Mikee www.hemipartsking.com, ph. 4025973242.
The heater we use have threads at the end, so we screw it at the frontside of the oilpan below the windage tray. The wires we run to the frame and...