Separate names with a comma.
Here is the email addy for ontrack insurance from his YB postings, KENNY@COISERVICES.COM Sadly though while getting this info I found out Bill...
Agreed on the Bill Lutz deal he would be the go to guy to ask. I know it used to be available for on track use through him and others.......
I am with Mike on this, could be anything. I would pull everything down and check all the parts, be a real shame to find one part that changed the...
Really? Not saying your wrong, just curious what type of problems you and others have been having? Heard the same on the 8973, a ton of bad...
I certainly lack the experience of most here on blower deals. However I have seen the same brooks rods where a major mistake was made (not by me...
Retard on top Whats up Mike been ages. Anyhow on the retard deal, its been my understanding that in NA applications its more effective with...
Been a long time away from this board. I have had very good luck with synthetic and shockproof is the way to go. In my personal opinion I feel...
Randy is absolutely one of the best, as helpful as anyone could be. As far as the battery, lots run a reg lead acid, lots run an AGM....
At 77° methanol has a spec gravity of 786.51 where water has a spec of about 996 In theory if you have the spec gravity of your methanol at a...
Have you changed lifters recently? Sometimes they can leak. I may get bashed here but, If nothing else works and you don't mind doing stuff...
Rest in peace. Thoughts and prayers to the family.
Did you have more air pressure on the last run? The first two runs you can see the car wad the tire and drop the car onto the wheelie bar before...
Mike the post is pretty good, but what really impresses me is typing that whole thing out on a blackberry with your thumbs and not having any...
I agree with the 14-16 also, as far as what to prime with I always mixed the fuel based on temp if its dead cold pure gas once it hits 70° I use a...
Secondwindracing, see what a 8th grade education will do for you :rolleyes: Mightymouse, I would post up the type of car you are running and...
Just multiply the tire hiegth by 3.14 that will give you the roll out then divide that number by the rear end ratio that will give you the inches...
In my opinion the 8973 (like any solid state electronic device) needs to be protected from transients to the inputs (needs a solid, preferably...
I am not sure I understand your question but if you want to know what gear change would net you the same result as that tire change the answer...
Aerospace/Nasa input shaft Coan as well as many others sell the ringless "Nasa" input shaft, though many call it aerospace alloy. Check you...
I agree with Mike on this, Most all the ring manufacturers have specific lubricants and application amounts to seat thier rings correctly, of...