Separate names with a comma.
is a blown kb olds never said anything about gas or methanol. but yes instead of asking be a smartass. it is methanol. is an enderle 1100 pump....
i have a 1 1/4 inlet on fuel pump, had an aluminum tank with a weld in bung. am switching to a clear tank this year. i cant find anything for 1...
zoomies my tubes are 18 inches long from flange to tip. flange is .250(1/4) thick and tubes are .1875(3/16) thick. how long are the zoomies...
headers yes i have zoomies. the short ones. that is what the first guy asked about. everyone else has talked about full exhaust systems which has...
aluminum zoomie i have them on my mud car. made them myself. 6063 aluminum 3/16 thick. have blown 406 10-71 hihelix littlefield 50% over. make 40...
so did you lean out the motor more? i have inserts in all eight holes. and the car will never run over 200 ft so im happy with the fuel but not if...
they are turning slight gray/black. blower is 51 percent over makes 38 to 40 pounds boost. only run 200 ft so want to lean on the moter, timing...
i know this has been asked before. but i have steel inserts in brodix aluminum heads, have burned the cadium of the face of plug and down to first...
i have seen it work wonders on some of the blown alcohol motors in mud racing, was just trying to see what you guys thought of it. thanks for some...
i have a blown sbc and wondering about nitrous to cool the charge? is there any ratio on shot of nitrous verses how cool the air will become? ex...
have read on here about fixing spark plug threads. it was recommended to fix them with aluminum thread inserts, but mine already had steel...
yes i have to agree thank you for all the info want to learn as much as possible and it helps when you learn it from someone that has already done...
is there any rule on percentage on jet sizing? say if you were 30over and went to 40over or 40 over and went to 50 over? jeremy
so if you go up 10 pounds of boost you need 3 gallons of gas? is there a formula for percentage that you overdrive a motor if you have your...
have already called cfe talked to scott kieffer they make the sbx head how ever you want it? bolt on stock or the 4.5 bore spacing. cost 8500...
cfe makes two heads that will fit that bore. the little chief and the sbx head.i have called and got info on both heads and block. just need a...
get a 300 pound weight break if the two motors are able to make roughly the same horse and tourqe. big block has to weigh 2450 small block has to...
anyone had any dealings with the cn small block? i have read on here about their big blocks, but was wondering if anyone has a small block...
no such rules in mud racing:cool:. do you have a website for intercoolers?
http://www.vortexitalia.net/categories.php/Cold+Air+Guns sorry it was -30 degrees not -40 still very cool air and says the more air flow the...