Separate names with a comma.
Speaking of old car recreations...the FC I'm building is an original 1970 (built in '71) Cuda. Found the body rotting under a tree in some farmers...
Paul, your correct. I'm referring to the castor angle of the King Pin. Not the camber. Camber is set by the design of the spindle and I have been...
Thanks Bob. This is my first FC. (Previously had a FED which had 20 degrees). What causes the front wheel "shimmy" that I've seen on some FC's...
What is the best King Pin angle for a Funny Car? 12 degrees? 15 degrees? 20 degrees? Cheers Dave
I run a 3 speed air shifted Lenco. Its a simple Nostalgia FED, so no computer. Gene, is the valve you describe electricaly operated, or air...
Need advise on what pressure to set high speed leanouts. Currently running a mild 8/71 blown hemi. 990 pump (with a pump sizer). I have one...
That makes perfect sense. Thanks :)
Should you run a heavier valve spring pressure on the exhaust valve or the intake? The exhaust valve is getting chased home by the piston, so...
I have a similar combo, 480 cubes, 25lbs boost, 990 pump, similar cam etc... I had to install a pump sizer to bring the main jet size down from...
Interesting thread. What performance gains could be expected simply by changing from a Mallory to a promag? I run a Mallory 3 thats hopped up...
7 seconds Hi Mark6052, Your right, Im not running a 5s T/A. Its a Nostalgia FED. Motor is an Arias Hemi Chevy and we run 7.1 at 191 (small...
Devcon I have an old Iron '57 392 Hemi (nitro) block thats filled to the top with Devcon and that stuff is as hard and tough as steel. It was...
Along the theme of filling the block with Aluminum....why not consider magnesium? Lighter, strong, and maybe possible to have it pressure diecast...
Any of you guys heard of Ridgecrest Rods?. Australian manufacturer of billet rods. That's whose rods Ive been using for a while now. They are a...
Thanks everyone for the replies. I have contacted GRP, MGP and R&R rods... just need to make my choice. If only some smart young wiz kid could...
Does anyone have contact details or website for MGP Rods? Cheers
I tried running with no restrictors and found too much oil went to lifters, not enough oil to mains. Installed restrictors. No oiling issue...
maybe 30 or 40grams heavier on each rod??
In a blown alcohol, (max 8500rpm) application, how important is the balance of all the rotating parts? If I change to new rods, or pistons that...
Contact Brendan Murry at Performance Motorsports. bmurry@racecarparts.com he's very familiar with Arias product. Cheers
