Separate names with a comma.
$350 for the 990 $200 for the 1200
Pumps were all just flowed The 2 990’s were both great and the 1200 should be rebuilt as it didn’t flow as much as it should have 990’s...
I used 15 psi in the accumulator. Worked great for years. I have one for sale if someone is interested.
I've been using the r5671-9 part number 7382 for awhile but just ran out of plugs My boxes used to be yellow, but looking online the plugs...
Tops are used but not scary like the bottoms .
Thrust bearing is not happy on the shoulders
Dailies engineering 6 stage pump 1.6 gear with a Keith black block .Three pickups in the pan , one in valve cover and one in distributer hole (...
Dry sump. This was the speed pro 142M bearing from last year. 12 hits on these. He made a change to clevites ms1795v bearing, no squish but now...
00375 clearance on the mains , 65 psi at idle and 140 psi at 8300rpm , brad penn strait 50w . Main journals look fine . To much timing pounding...
Seven - 210mph runs. Turbo combo. V bearings on mains and rods. Rods look like new mains look like this. [img] I just read an older...
Im almost due for some more of the camaro's vids!! Yup, jetsize is helpfull. Not that your performance doesnt speak for itself. Let me know...
If you had a real dirty enderle 990 pump and was concerned about contaminates internally, what would be the smartest way to clean it out....
Ya I was worried about that with the BDS stage 4 blower that I put on that car, teflon and nyatron strips. I just got it warm a few times, let the...
sorry craig, I meant to say 60degree compared to 120 k11
Its a street car, running a BDS 1471 60 degree rotor, hit its max power at 25 over, and then it slows down on GAS. I want to try the k11 on...
How would a hi helix k11 rotor on gasoline something like 20 over perform compared to a 120 degree rotor? Maybe 10 over, it wouold probably make...
Does the roots snouts gear couplers ect, work with the psi d screw blowers? I run a BBF and I need a real long snout to reach the crank. :cool:
Wedge BBF Cylinders 4 and 7 are idleing in the 600range,( rear of motor) all the rest are in the 800 range. RPM is the red line and its...
Heres a pic of the data [img] For a closer look, the link http://www.supermotors.net/getfile/807000/fullsize/clipboard01.jpg
um, good idea. What oil cooler did you use? Pics?
