Separate names with a comma.
Go with the Pam stuff. And use wax and grease remover. Your Pal, Gary
Fuel transfer Didn't know, Didn't care... Owners shop, VERY clean and dry air. We were running 100% straight from the drum. A Fuel...
Fuel transfer pump Curved tube that goes ALMOST to the bottom of the barrel, like a manual transfer pump with a ball valve in it Put a...
T/F vs A/FC Unless you have a properly controlled heat treating oven, the proper and EXACT procedure, AND the correct and rigid enough...
YES! Your Pal, Gary
Zero f**ks given............. nhra can dry up and blow away, but then again, they already have......... Your (yes, I hate nhra in it's...
Adapter rings A hunk of .250"wall, 3.00" od, 2.50" id, DOM tubing. Brake hone the ID so it slips on... cut into two pieces to fit the front...
burn out deal www.automantechnologies.com Tell Bob, Gary Anderson sent you. BTW, he will talk your ear off................ Your Pal, Gary
I would suspect that the real advantage to cooling the fuel would be to make the fuel charge more dense and to drop the charge temp AT THE VALVE....
Cooling Fuel 2.0 The fuel tank and ALL the fuel lines were fully insulated from the tank to almost the pumps. Industrial grade insulation....
Cooling Fuel In 2010 IHRA ProFuel Dragster we had a medical grade freezer to cool the nitro. I made 4, 5.5 gallon tanks with thermometers in...
Stripping paint off chassis Trevor; The quickest and easiest way would be to GENTLY sand blast it..... BUT, the sand blast will leave teeny...
Camber setting Camber 0 Toe .125" toe in Caster 7-10 degrees positive. That Meyers guy might know a thing or two,..... Your Pal, Gary
SFI roll bar padding Don; When you get it, use a heat gun to warm (not hot, but warm and pliable)the stuff to bend it. Makes for an easier...
Cold weather start Corey, if you have some sort of blower/heater, let that blow on the engine for a while. Like in February and the car won't...
Scumbag sellers Over the years I have purchased thousands of dollars worth of race car parts from many different sellers. I have never had a...
We did use a medical freezer and some 5.5 gallon aluminum tanks that we could put two at a time in to lower the temp. IHRA ProFuel 2010 We were...
BBC/481x cranks Just curious, what crank? Thanks. Your Pal, Gary
Oil Accumulator The oil accumulators are a cylinder that is capped at the two ends (both end are removable, for cleaning) and has a roughly 1"...
System 1 oil line If they get to be too long, Use some 1" diameter, .083"/.120" 6061 wall aluminum tubing. Weld some AN male fittings on the...