Separate names with a comma.
What is the most boost you guys have seen with a 7AL3 and HVC II coil
timing what is the difference when not running a mag but a 7AL-3?
lube you can use KLOTZ or the speed warehouses (jegs & summit) also carry them, some with fragrance as well. most of the places that sell alky...
14-71 SSI 20% over and 25 lbs of boost. i run a MSD 7-AL3 , HVC coil NGK 9 plugs gapped at .018
cam what converter are you running? do you know what your timing events are at .050. you can pm them to me if you like. mine is 54mm Bullet...
Crandall track i was there this weekend testing my car and they had a couple of AA/FA testing. i was 1.00 60' and the track held great. saw one...
i will have to look at the data logger at the 1/8th mile to get the exact temperature change. The temp difference was between 1/8 and 1/4 o nthe...
just took it out the first time for T&T. made a 150' hit and had 3 holes hotter than the rest. changed the nozzels in those holes and changed...
timing mark is just on the electrode side of the bend on the plug
post your cam specs for BB chevy and convetional heads. would like to see what everyone is running.
i made the first hits today and my EGT's are reading high, in the 1350-1400 range, but the plugs only show 1/2 the cadium discolored on the face...
so what you are saying is that if the belt is moving towards the engine (riding on the edge of the idler on the motor side) that the snout is...
i have annodized pullies, but a chrome idler. I had the same crank pulley, intake, idler on the previous set up with no problem. I have a 3"...
I have a brand new GT belt that is fraying small white shavings (almost dust-like) that are blowing all over the motor. It seems to be coming...
how many of you run a filter in your fuel system on blown alky, and where do you install the filter?
snout bearings what did you do to correct it? how many times did it happen to you?
is there anything wrong with turning the pulley around with the open end towards the front?
what did you end up doing?
where is the best place to get a set back plate for a BBC manifold. I want to set the blower back about 6-7" Thanks
$300 for a set of 8 EGT's ? is this the set you have used on the dyno and on the pro mod?
