Separate names with a comma.
The first hit will be an educated guess/rich and less than 330ft. Maybe not engineering logic but I figured fire it on the jacks and try to get a...
lol. why didn't you mention that yesterday? It starts and runs ok. Just a weird spot in the response. Thanks for the help.
This is still on the jacks. I'm not going to the track with an engine that wont take throttle clean. It was idling at 600 degrees avg. I've...
I have a BAE 5 @129% with a c rotor that ran ok last season. I raised the compression from 9.8 to 11.2-1 and updated the cam . I also slightly...
shake If its a T/S car with a 6 shooter i'll assume converter driven. I'm not a big believer in weak or low power shake situations for the...
I talked to a lot of people on my BAE and came up with 10.0-12.0-1 even with a C at 129%. 9000 rpm is pretty low these days so you can get away...
hemi We ran a BAE for the first time last season and learned a valuable lesson like you...measure the compression ratio! We bought a supposedly...
hemi I think you did your homework. I know the car was soft last year and it looks like it still is. There are cars that can go pretty quick...
I read crankcase pressure in the lifter valley and made laps to evaluate my puke tank venting. It would produce over 2 psi on a 45psi chevy D...
rocker The BAE individual rocker setup looks like a work of art and everybody I know that runs them is very pleased.
11mm I have 56 laps with 11mm at 100-129%. Half of them were wide open on the two step. The rest were air throttle on the two step. I've never...
Battery We use a lith ion sport bike battery. Super light and bulletproof for 2 seasons. We killed a normal motorcycle battery with tire shake...
idle we ran roots 526/540 chevys with typical fuel system and 110 or 990 pumps and big chief or dart 360's. I always set the BV at 69%. it idled...
jetsize x2!!!!!!!!!!
crank Joad broke a Bryant. The way I look at it, a good used billet will bring 1500.00 and a new Bryant is a little over 3000.00 It's really...
I have a 500/500 296/302 116LS cam for a c rotor 521 BAE5 outlaw combo. At .050 on the intake the card says install at 32 degrees. I've heard...
pins just got a set from BAE today. 27.00 gets 300m.
I have the BAE 3.25x1.094 230g pins. 7 out of 8 were bent. Jeremy told me the longer 255g pins are better matl. and live better at 70.00 or so...
Probably not what you want to hear, but our chevy blew oil everywhere and the hemi doesn't .The chevy was noticably worse with a screw at high...
Puke If the tank had breathers on it chances are its not built properly...the system has to move a lot of air. We have measured crankcase...
