Separate names with a comma.
15 lbs with no bearings or center cap,no tire
I will weigh one tonight when I get home
If it was me I'd pull the water, dont have to do anything you can even leave the fittings open. I spit a gasket once w mine and the water made...
You can use a gearset elimination shaft and bushing from lenco and keep the empty case intact, if you wanted to keep your driveshaft as is
Enderle can do them for you
whats a good common way to vent a 10 gallon funycar type cell? Has a -12 fitting out the side near the top now been running to a puke tank. Any...
17 lbs w lip and a barrel valve, no lines
Don Wooten was the one running it in ADRL, think Conway was helping. I think a 4.11 best at 180 ish or so mph. I think that NHRA mandated the 50%...
are you sure about a 1600 belt fitting a big chief? seems short I wouldnt be concerned about a spacer on the bottom, as long as you use quality...
Are you getting the .065 pre bent in kits? who sells different thickness? I hear titanium cracks also, I go thru a couple sets of headers a year...
No he actually asked about zoomies on a door car. Wonder if anyone has tried at least like a funnycar length?
Those are short like a dragster?
Joe ask any transmission builder:)
My mag mounts hemi location now, no fuel lines close like a chevy. True no one plans on a line leak, but I have seen several cars leak at the...
I had a gasket under a fuel cell cap leak, dribbled back to the mag which was about 4" behing the tank. Made a nice flash fire I felt in the car...
I'd be afraid of running over them, probably crack gue to vibration
You know what heppens when you have a fuel leak
I pull a 2400 lb pro mod with a 36 volt, does ok . Top speed is kinda weak pulling probably 16 mph
If you start it with a blower mounted starter, an electric cart works great, and you dont have to cart around a batter pack
That builder probably hasnt used it, it's very helpfull
