Separate names with a comma.
BBC Timing to start Don, I ran a real close set up, we started off at 30 and worked are way up to 35 degrees, I would never go over 36. Just to...
fuel pressure Mike, what Is the best to limmit the amount gear teeth pressure pulses that the computer see's ? we are pulling the pressure off...
Rpm data logger I have been running one on my PSI screw blower/ dragster for 4 years now and it has never given me any problems, I did have a bad...
Converter There is also Spec Rite Converters in Redding CA, Rod is one of the best, 530 243 8300 and you can not beat the price !!!! Good Luck...
Race Pac Try calling Randy at RPM 504 923 3978, He has a real nice unit and you can NOT beat the service or price. IMO, I have had one for 3...
Hoosiers Any one have a contact number to a Hoosier rep? Thanks Butch
BBC, psi screw set up Tom, You have a pm, you can call me at 707 974 3185 Butch
Tune software Patrick, the software work very well, when will you have it ready to sell, I would really like to see the complete version? can you...
RPM system Call Randy at RPM, tell him what you are doing and what data you need, he is a really nice guy to work with and will build a unit to...
Tuning change when porting heads All, I just wanted to say thanks so much for all of the GREAT info, I will fatten up the AFR on my Davenport...
All, I am running a blown alky BBC set up, the heads I run are the dart 360's with the dart CNC porting, and they flow about 365 CFM with my...
oil in the valley BLWilliams, Sorry about that I run a wet sump in my dragster with a titen pro pump. SodDak, what it helped with was oil...
Oil in the valley on a run All, I have been running New Centrey soild BBC block for years , there is a lot you can do to fix this problem,...
lOW GEAR LEAN OUT Mike, This is just the info I needed. Thanks you very much !!!! Butch
PSI low gear lean out Mike, Is it ok to run the low gear lean out on a normally open CO2 controlled valve with a #6 check,( and at what psi...
Blower If the class you run, lets you run any blower, and you are going to need extra H.P. and you want to take some load off your lower end ?...
I was trying to get some info on adjusting the trans brake band on a Bruno, does any one know how to do this and how often it needs to be done? we...
Trans brake Has anyone seen this issue with a Bruno Drive? and if so, what is the fix? I am sorry for the hi jacking, I just went from a glide to...
Line lock Brandon, what kind a problems can you have using a line lock with a lencodrive? Thanks again for the great info!!!! Butch
Data logger infomation If you are running a blower set up I would stay away from the Edelbrook unit, it does not have the necessary shielding for...
