Separate names with a comma.
I wonder how long they (NHRA) actually looked at the run data from the pass, or were they in there drinking a beer with Bernie??? Probably gave...
You can press the pump shaft in the drive gear of the pump for the difference
try any local over the road truck supply store. they keep a good selection for air brake lines and such
Sonnys head, like a 2005 or big chief style? i hope those are titanium valves to start with, if not get some
Left em alone, ended up going to a single bar
mine bend the same way, tie the top to the bottom bars in the center with a link or something similar
Only incrase is if you can turn the motor harder due to lighter valvetrain weight, and the weight lost in your wallet!
what does Taylor say about it?
Darton sells them www.dartonsleeves.com
Wheres the close up shots of the wrap on the blue corvette? Mostly the sides
1705 think width is 85, 3 3/8. I believe we running a 25 and 54 on it now
I run 11mm on my 481x, seem to work ok
I remember bill doucet had the same problem, and a couple others, he had it figured to a certian batch number stamped on the hex. Funny i was...
Who sells them 1o" gearsets? Ratios available? And i suppose they fit an ultracase with some case grinding?
Did you get any red ones?
I ran a Littlefield k9 rotor then switched to a modded k11 on a 481x, not a whole lot of diference between the two. nothing wrong with that...
Intake gaskets??
Louisiana is the place
Yes or buy a donut
If it could be done with a minimum of work i would look into it, like buying stands-floaters,but be safe and stay at home don just in case:)
