Separate names with a comma.
FOUND THIS ON ANOTHER SITE.... TAKES A SECOND TO LOAD.......TURN IT UP http://www.hauntsusa.com/images/GirlWatching.swf
Heres how it all works.... http://nhra.com/stats/ptdescri.htm
Yes , you will stay with 36, read your plugs as a precautionary measure though. 36 is usually a preferred choice my alky injected bbc motor...
......I just love Ora`s hub puller. ITS ABOUT $400.00 w/wrench but in the long run, nice tool to have.
Will your pm box is full....... thank you !!!
A reliable source has confirmed that newly christened TAD licensed driver Kate Harker will drive for veteran team owner Tom Conway during this...
Some of the choices on who`s using who`s heads or who`s is better is a matter of opinion, it mostly has depended on what bore and stroke...
good job not breaking your stuff. 20 -24 lbs is a great zone....... to the big end.
Found this in a bat cave at nhra`s website showing how full each class is by percentage . 11/09/2006 - 11/12/2006 - Automobile Club of...
my opinion, yes too lean. go with a .100 or .105 main to be safe. unless your at about 4500ft alt.
Brad , you are going to need to creep up on this boost thing. by reading your plugs to determain the right amount of ignition timing and fuel...
birds may be 180 out, but i would pull the nozzles and lines and flow check them with air and or fluid to see at what psi the check ball and...
yes to system 1
funny`s in fuel typically run either the Dual Side by Side Master Cylinder, CNC. 3/4" bore to the front brakes - 7/8" to the rear brakes $...
maybe the hoosier ????,....but for too much grip run the M/T 36........liners..hoosier
it gets leaner with higher % leakage.... so the nozzles are in the intake???? not the hat ??? or you have 8 in the hat and 8 on the intake ???
......WACK.....WACK.......WACK.... o just kiddin...LOL
My leakage was higher because i ran it on the rich side at a idle, the pump i have is the rons 0-1/2 i am launching at 4800 rpm.
is your hat a 4, 6 or 8 nozzle hat ????? a 115 main is going to put to much fuel back to your fuel cell or pump loop. i have a 505 bbc w/335cnc...