Separate names with a comma.
not sure about the 36" hoosier , but my deltas with the 34.5 hoosiers weigh 61 lbs each .
bolt circle is 2.750
also replace the studs and the cross shaft on the rockers that came loose or you will be repairing it again !
you did't say how many volts to the starter . if you,re not running at least 16 volts you will have problems getting it to light .
i have a rcd tall cam cover . bare , no idler if that helps . joe 7014267450
jay , check rbs superchargers web site . they have a couple in the used section .
i should note that the total thickness of the centers varies , thus changing the back spacing . the weld magnum centers are the closest to the...
jay, the weld wheel ,the american and the sander centers are all the same dimensions and will interchange .
i have a 1.25 gear set i would be willing to trade for a 1.41 or a 1.38 gear set . joe 7014267450
jay , i have a set of american 5x5.5 centers that i would be willing to trade for a set of 5x5 centers .
I have two sets of crane 66547 hemi 1" lifters . one set 18 run other set 20 runs . 500.00 a set plus ups . joe 701-426-7450
camshaft endplay should be between .002 and .010 . and do not use any shims under .010 thick as it will just spit them out . before switching to a...
as bad as we all treat our torque wrenches , they should be recalibrated twice a year . go to www.teamtorque.com they do all our wrenches and...
today i heard that NHRA is going to require billet blocks in TAD and TA/FC in 2007. anybody else hear this , or is my source full of BS JW
Stephen : I don't know if steve has a web site ,but his phone # is 562-943-1595 . Hope this helps J.W.
Mike : article is in sept 2004 Drag Race Action .
Brian : faria pump is 3.500 from mounting face to end of pump .faria is 2.187 from centerline of pump shaft to top of pump . plueger pump is much...
brian : i have a kb ,faria and a titan oil pump and the faria is the smallest of the bunch .i can give you dimensions of pump if that will help. JW
brian : is it hitting the main frame rail or just one of the uprights/diagonals . Moving the motor to get the pump to clear the main rail is a...
Mike : What's wrong with MSD wires you ask ? Other than not lasting very long there great wires . Granted , with a 44 amp mag your going to kill...