Camshaft end play on hemi

Discussion in 'PSI Superchargers Tech Questions' started by FLAT737, May 24, 2009.

  1. FLAT737

    FLAT737 Member

    Joined:
    Nov 28, 2008
    Messages:
    92
    Likes Received:
    0
    On my bae with rcd front. How much cam end should i have??
    Thanks
    randy
     
    #1
    FLAT737, May 24, 2009
  2. hemi altered 378

    hemi altered 378 Blown Altered

    Joined:
    Jul 3, 2004
    Messages:
    864
    Likes Received:
    0
    we run ours pretty tight....maybe .001-.003 it seems to work pretty well.
     
    #2
    hemi altered 378, May 24, 2009
  3. Don Onimus

    Don Onimus New Member

    Joined:
    Feb 28, 2009
    Messages:
    1,337
    Likes Received:
    0
    cam end play

    I try for 0 to .004. Just did mine. Had to machine .056 from pump extension to end up with .003 with bearing and shims on each side. Keep it tight. That way you don't have to worry a lot about the pump shaft pushing against the pump. Take your time and make sure you are good. Don
     
    #3
    Don Onimus, May 24, 2009
  4. fastavenger 588

    fastavenger 588 New Member

    Joined:
    Feb 19, 2008
    Messages:
    424
    Likes Received:
    0
    .003 is a good number to shot for :)
     
    #4
    fastavenger 588, May 24, 2009
  5. marklee

    marklee Blown Alcohol Dirt Drags

    Joined:
    May 21, 2007
    Messages:
    113
    Likes Received:
    0
    End play

    Zero..No pressure & No end play..
     
    #5
    marklee, May 25, 2009

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM