Polishing wheels

My double beadlocks need alot of TLC. Has sat for about 2 years. Is there and tricks or ideas for getting them nice again. Don't get me wrong, they are still in good shape, Just dull and has some spots on them Thanks Don

 

MOTHERS aluminum mag polish! good old elbow grease and a very soft coton cloth.
The mothers buff ball might knock it down quick at first then finish by hand Don.

 

hey don go to the part store and get a polishing ball put it on a die grinder and get after it you can do a set of wheels on a street rod in 20 min..works great..then after that use some flour on a terry cloth towel and rub them with that and it will get any residue off..beleave me this works..Dave

 

1 last thing use mothers on the wheel with the power ball

 

I just recently cleaned up my beadlocks using mothers polish and their powerball. It worked great with very little effort. I would start trying that.

 

wheels

Thank you, everyone has the same general ideas. Will go buy on today. Thanks Don

 

that powerball is the sh&t on wheels. your fingers wont be hurt afterwords. either