Oil Pressure

Discussion in 'PSI Superchargers Tech Questions' started by AlteredFan, Apr 14, 2009.

  1. AlteredFan

    AlteredFan Member

    Joined:
    Mar 11, 2008
    Messages:
    30
    Likes Received:
    0
    Hi All,

    I have a KB Stage 10 with a P & P dry sump pump, red line 60 weight oil. I haven't had any issues with bearings or rockers or anything like this but appear to have lowish oil pressure. It drops as low as 97 psi at 9000 in high, and only has a max 115 in high. Is there an issue here to worry about? or because its not hurting anything don't worry?

    Thanks
     
    #1
    Last edited: Apr 14, 2009
  2. AFC357

    AFC357 New Member

    Joined:
    Nov 19, 2007
    Messages:
    986
    Likes Received:
    0
    Switch to 70W? Shim the relief spring? Mine does the same thing!
     
    #2
  3. blwnaway

    blwnaway Member

    Joined:
    Jun 28, 2006
    Messages:
    411
    Likes Received:
    1
    It wont hurt anything, that is plenty of oil. Make sure you dont have a steel braided line coming from your pump, they are not designed for suction and are notorius for making very trivial oiling problems by collapsing.
     
    #3
  4. Nathan Sitko - 625 TAD/TAFC

    Joined:
    Jun 24, 2003
    Messages:
    725
    Likes Received:
    1
    Our P&P pumps both have adjustment bolts in them. The cap that goes over the relief spring is threaded 5/16"NC and have a bolt with a jam nut in it. Makes for easy adjusting if you need to.
     
    #4
  5. pete9857

    pete9857 Member

    Joined:
    Jan 11, 2005
    Messages:
    477
    Likes Received:
    7
    hose

    What do you use for a suction line to the oil pan?
    Glenn
     
    #5
  6. Danny Humphreys

    Joined:
    Aug 4, 2003
    Messages:
    489
    Likes Received:
    0
    Goodridge teflon hose, very stout and Will hanna sells it
     
    #6

Share This Page