Oil Pan Gasket

What do you guys use for oil pan gaskets? Mainly looking for BBC, but curious how hemi's do it.
I used to use just silicone. It sealed great, but was a pain to remove.
I've been using a 1 piece blue gasket, it's not too bad.

 

The chrylsers i play on usually use orings. When I get my two piece sbc pan, it'll have a blue rubber at the block, then an o-ring at the split.

Currently i use just a blue felpro re-usable on my milodon on the small chevy

 

one piece blue on the chevy

 

One piece blue BBC

 

one piece hemi reusable with crush rings nice part used it all year and pan comes off every week

 

With the kinda senile, half blind, idiots you had working on your car you needed one with crush sleeves

Richard Gavle

 

I also need a one piece blue gasket for a Gen 5 BBC. Anyone have a part number?

 

Any of you guys running old 392 Hemi's, we seem to not be able to keep the oil pan sealed. Any suggestions or is it just an inherent problem with the boost.
This is a blown alcohol 392, sorry should of said that first.

 

How big are your breathers?

 

Ø1 1/4"
One in each valvecover.