on board starter

Discussion in 'PSI Superchargers Tech Questions' started by moparchris440, Jan 14, 2009.

  1. moparchris440

    moparchris440 Member

    Joined:
    Jun 8, 2008
    Messages:
    370
    Likes Received:
    0
    Who sells a on board start for BAE hemi with a Mag44 that will bolt to a Coan mid plate adapter. Also do I have to spin the motor extra fast to start because of the Mag do most use 24 volts ? - First Mag was using msd 10. Thanks Chris
     
    #1
    moparchris440, Jan 14, 2009
  2. Kevin O'Dell

    Kevin O'Dell Member

    Joined:
    Feb 26, 2008
    Messages:
    84
    Likes Received:
    2
    We just bolted our stater to the midplate. We use a CSR starter and 24 volts to start. The back of the ignition box should have an X stamped into it. Ours didn't and we had to send it in and have changes made so that it would start on the lower turning RPM.
     
    #2
    Kevin O'Dell, Jan 14, 2009
  3. fastavenger 588

    fastavenger 588 New Member

    Joined:
    Feb 19, 2008
    Messages:
    424
    Likes Received:
    0
    starter

    we use a 16 volt bat no prob and a powermaster starter make are own plate:D
     
    #3
    fastavenger 588, Jan 15, 2009

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM