burnout limitter

any one know where to get one of those billet clip on deals

 

http://wizardswarehouse.com/indx2.htm

PN 1096.

 

just REMEMBER...just because it clips on you can still over rev. the motor...in a k style barrel valve I think 1/8 or 1/4 the fuel flow is all open the blower is makin boost the ports are commin open and maybe the hi speed is also so that means the motor is going to over rev...if you don't think so let me send you some pics of this weekends race lost a valve in the burn out and yes...had the burn out limiter on....the compt. said way over reved...Brian Ratleff and Tom conway will tell you the same thing as I'am..trust me...cause it sucked...for now on all I do is look at tach and count to 4 and get out of the burn out the car will go straight...good luck and if you want a good clip on get it from Bob Auto..Automan....Dave Lowe
www.myspace.com/daveloweswr

 

do u have a email for this bob auto and thanks guys

 

yes I have a number at the shop I will send it to you tomorrow or you might go to www.automan.com I think that is web sit also I will give you his cell #..dave
www.myspace.com/daveloweswr

 

Here is Bob's web address http://automantechnologies.com/index.html

 

hey bob thanks for posting that for me busy putting another motor together

 

I have one coming from RBS. Looks like a good thing.

 

thanks i found one at wizards wearehouse

 

I just bought a Automan and need to trim it up a bit for my setup. What do you think the best RPM to set it up at running on the stands? I usually rev mine in the burnout around 5000-6000 RPM depending on the track?