Gore barrel valve

Discussion in 'PSI Superchargers Tech Questions' started by Bigpower, Apr 3, 2008.

  1. Bigpower

    Bigpower New Member

    Joined:
    Mar 26, 2005
    Messages:
    47
    Likes Received:
    0
    Gore barrel valve anybody have the phone number for them?
     
    #1
  2. T.A.D. 776

    T.A.D. 776 New Member

    Joined:
    Oct 12, 2004
    Messages:
    217
    Likes Received:
    0
    Gorr Flowed Fuel Systems
    1969 Commander Drive
    Lake Havasu City AZ
    Phone 928- 855 8800
    FAX 928-855-9898
    www.gorrfuelsystems.com

    I have one of their Barrel Valves and it's the Best in my opinon.
     
    #2
  3. Ken Sitko

    Ken Sitko Super Comp

    Joined:
    Oct 21, 2003
    Messages:
    759
    Likes Received:
    0
    I'm putting mine on for the first time. A couple of things still aren't clear to me. Do I set the linkage so the pin is up against the stop at idle, or is there supposed to be a gap there. I believe you use the first screw to adjust leak down; does the second stop (starting line leave) get adjusted with the engine running, perhaps adjust it until the pipes are fogging, then go from there?
     
    #3
  4. Lonnie Houde

    Lonnie Houde Member

    Joined:
    Nov 14, 2005
    Messages:
    252
    Likes Received:
    0
    Ken,

    Set the linkage so the pin is against the stop at idle. Then adjust your leak with the first/front screw. Then you will have to set the stage volume thru live feed on your computer while running. "That's the easiest way."
     
    #4

Share This Page