crank shaft hemi

anyone know anything about the new hemi
crank from ohio crankshafts
im on a budget but i know you pay for
what you get
1695.00 sounds really good but
bryant 3000.00
any input would help befor i buy
thanks
duane 618-781-4703 call if bad or pm

 

The Real Deal

You won't get anything but good replys on this web board about sponsors products or Will Hann will remove it, or at least my post have been getting pulled? You might try another web site that isn't getting money from whom you want info from other racers.
Andrew

 

ohio crank

I have been over to Stan and scotts shop do not seem to be any junk sitting around. I would say they are running that crank in there Pro Mod. I would say you will see 5.90s out of them, 6.0s in Gainsville. Should be a nice product. just my 2 cents.

 

Spend the extra money.

 

5-6 years ago we got a crank from them and its still alive.
We just ordered another one for a new motor.

 

You never mentioned what power level you wanted to run.

Eagle is offering a one year limited warranty on their 4340 cranks with the optional ESP Armor finishing process. They are rated for up to 1500 HP without the new process. You would have to ask them if the process raises the HP rating and what the limits on the "limited warranty" are.

3.750 and 4.150 stroke with Chrysler rod sizes
3.750 , 4.150 , 4.250 , 4.375 , 4.500 stroke with 2.200 rod sizes.
All for internal balance. Approximate weight is 70 Lbs.

Go to www.eaglerod.com and read more about it.

I have sold hundreds of Eagle cranks to customers and have never had a problem with any of them.

Ran 6.88 @ 198 with a set of Eagle H Beam rods in a Blown Alky Big Block They are only rated at 900 HP and we were pushing them way past that.

I run a Bryant crank in my KB / BAE powered car.

If you can afford it the better parts are almost always worth the extra expense but there is a point of over kill on anything.

Note to alloutracing I personally find your statment highley unlikely.

 

After trying 5 different manufacturers, all I can say is one word: BRYANT. I've had three over the last seven years. Still got all three. Pulled out the one from last season; magnafluxed it and had it x-rayed; no cracks. Won't tell the number of runs on it-----you'd call me a liar. BRYANT.

 

bryant all the wayyyyy..Dave
www.myspace.com/daveloweswr