need to trim a trans blanket

Discussion in 'PSI Superchargers Tech Questions' started by rick macedo racing, Dec 8, 2007.

  1. rick macedo racing

    rick macedo racing New Member

    Joined:
    Dec 12, 2006
    Messages:
    228
    Likes Received:
    0
    Any ideas on the best way to trim the holes on a trans safety blanket ?
    Rick
     
    #1
    rick macedo racing, Dec 8, 2007
  2. Brad Hiatt

    Brad Hiatt Member

    Joined:
    Oct 22, 2004
    Messages:
    144
    Likes Received:
    0
    We use a metal scraper to trim nylon blankets occasionally or trim belts on blankets. Take the blade and heat with propane torch. Then press against the blanket or belt. If you had a set of steel hole punches for gaskets you could do the same thing.

    I have never tried this on Kevlar before.

    Brad Hiatt
     
    #2
    Brad Hiatt, Dec 9, 2007
  3. underby6

    underby6 Active Member

    Joined:
    Sep 28, 2006
    Messages:
    1,189
    Likes Received:
    0
    We've used a set of tin-snips to trip our nylon blanket. It worked really well, but have since switched to Kevlar and haven't had to trim it.

    Brandon
     
    #3
    underby6, Dec 9, 2007

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM