floaters

we have a crower 10 " clutch but the floaters are not the same size as the disq,the disq is 6.5 " and the floater is 7 " on the smallest size sow you are not using it complete
are there floaters that are the same size as the disq and where do you order them?
i know most are using the 10.7" but is there the same story with floater size?
thanks danny

 

crower sells floaters w/6.375 i.d. for both 10" and 10.7 clutches

 

Clutch Floaters

It certainly wont hurt to use what you have as long as the floaters are flat and not too thin..........I never had a Pedal Clutch where the disk and the Floaters were exactly the same size......You are not building a Piano guy ! For a real honest opinion however ask Bob Molinari , OR See if Bob Meyer is watching this ....................He actually is a Clutch Guru even if he claims to be " just a welder " !

 

thanks for the info ,i want to use all of the floater and disc sides if possible and if we can't buy them we make them oursellfs.
is there any site i can take a look for partn° from the floaters to order them? i also need partn° from fel pro for valvecover gaskets for a hemi stage v fat heads? thanks danny

 

I have two brand new for crower 10" 1.25" stand sfi $120 for both

 

Felpro Part Number Should Be 1665

 

Danny, why don't you get your valve covers o-ringed in the off season. Steve Lanius at Missle Enterprises in Jonesville Michigan has a neat cnc unit with a program he wrote to do my covers years ago. You can phone/fax him at 517 849 2290. He also has been years in developing a very neat dry sump system that is really very trick. Ask the guys at Indy Cylinder Head about it. We've saved so much on valve cover messes and gaskets that these o-ringed covers have paid for themselves many times over. Ever put 66# of boost into the crankcase when you hole a piston? Not a drop from the covers----it all went into our patented Blue Angel Puke Tank. No oil down - no fine.