What makes locktite release?

Discussion in 'PSI Superchargers Tech Questions' started by Big Russ, Jul 19, 2007.

  1. Big Russ

    Big Russ Member

    Joined:
    Apr 27, 2005
    Messages:
    41
    Likes Received:
    0
    Hi Guys

    What's the easiest way to get locktite to release? I got some studs with the nuts stuck on. I dont really want to heat them up too much - is there anything that will make it disolve?

    Thanks for the help

    Russ
     
    #1
    Big Russ, Jul 19, 2007
  2. aj481x

    aj481x Member

    Joined:
    Jan 27, 2004
    Messages:
    976
    Likes Received:
    18
    Heat works, usually doesn't take a lot. :)
     
    #2
    aj481x, Jul 19, 2007
  3. RBS

    RBS Authorized Merchant

    Joined:
    May 6, 2004
    Messages:
    1,095
    Likes Received:
    0
    Loctite

    Agreed With 481x A Little Heat From A Propane Torch Is Plenty
     
    #3
    RBS, Jul 19, 2007
  4. Rusty Kramer

    Rusty Kramer New Member

    Joined:
    May 16, 2003
    Messages:
    49
    Likes Received:
    0
    I have had very good experience with Loctite tech support. Heat is used on the red threadlockers as far as I know also.
     
    #4
    Rusty Kramer, Jul 19, 2007
  5. blownalcohols10

    blownalcohols10 New Member

    Joined:
    May 22, 2010
    Messages:
    11
    Likes Received:
    0
    Asked my buddy he says it takes a special key...

    Hope this helps
     
    #5
    blownalcohols10, Jan 25, 2012
  6. craig moss

    craig moss Member

    Joined:
    Sep 29, 2006
    Messages:
    574
    Likes Received:
    6
    A blue key
     
    #6
    craig moss, Jan 25, 2012

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM