Browell 6.3 Can

Anyone have any experience with a Browell 6.3 Aluminum Bellhousing?

 

i spoke to them at the pri show in december. at that time they still didnt have the 6.3 spec ready yet.

 

They have had it out for sometime. I got mine back during the middle of 2006
I also know of another local nitrous racer who has one. The problems I have had was that I had to remove the steel inner liner and cut about .750 off of it to clear the ring gear on the flywheel. I have also had to put thread inserts in some of the bolt holes for the inspection/adjustment covers. It appears mine was an earlier one and they just drilled and tapped the can for the threads, even though we didnt over tighten them it still pulled several out just because of the frequent removal. I think Browell has addressed that and is putting inserts in the can now. Also, if you are using a self starting set up with a 139 tooth or larger ring gear go ahead and have Browell cut the liner BEFORE they send it to you, otherwise you're just going to have to send it back.

 

my apologies to browell. i guess i got something crossed up in my conversation with them.

 

They have the 6.3 available....I have one but had a couple problems that they were happy to sort out. It appears to be a quality product and is about 1500 than a new TI can. I was just curious if anyone else had used one yet.