starter advice

Discussion in 'PSI Superchargers Tech Questions' started by bill, Jan 23, 2007.

  1. bill

    bill Member

    Joined:
    Dec 25, 2006
    Messages:
    104
    Likes Received:
    0
    on the rcd starter mounted on the front of the crankshaft was not engaged or turned in how munch damage would it do to the drive or crank
     
    #1
    bill, Jan 23, 2007
  2. michael hall

    michael hall New Member

    Joined:
    Oct 10, 2006
    Messages:
    280
    Likes Received:
    0
    it could either kick back and hurt your hands, or just burr up the cog where the starter connects. depending on the motor and compression.
     
    #2
    michael hall, Jan 23, 2007
  3. eli

    eli Banned

    Joined:
    Dec 24, 2005
    Messages:
    1,657
    Likes Received:
    1
    Back in the day there was no door nobb to screw the drive into the dog, and boy did we chew up some dog's, ya had to carry 2 or 3 extras all the time, and yes it beat up your hands too. :eek: :eek:
     
    #3
    eli, Jan 23, 2007
  4. bill

    bill Member

    Joined:
    Dec 25, 2006
    Messages:
    104
    Likes Received:
    0
    this starter is bolted to a rcd front bracket that bolts to the crank support
     
    #4
    bill, Jan 23, 2007
  5. hemi altered 378

    hemi altered 378 Blown Altered

    Joined:
    Jul 3, 2004
    Messages:
    864
    Likes Received:
    0
    bill....check your PM
     
    #5
    hemi altered 378, Jan 23, 2007
  6. nitrohawk

    nitrohawk New Member

    Joined:
    Dec 28, 2003
    Messages:
    1,016
    Likes Received:
    0
    This is common practice on A-fuel dragsters. Never noticed anyone having problems. They use the RCD brackets and you can remone or set up to leave on.
     
    #6
    nitrohawk, Jan 23, 2007

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM