Retro Plate

What all is involved in switching to a Retro type front plate? I see that it just botls on the front but is there any re-setting of the blower clearances?

thanks JS

 

Retro Bearing Plate

You Will Basically Have To Reset The Blower As The Pin Location On The Bearing Plate To Case Could Change As Well As The Bearing Location On Your Rotor End Clearances. It Will Bolt Up And You May Get Lucky That There Is No Resetting But It Is Critical To Have Your Rotor X,y In The Proper Places. You Usually Have To Machine The Top And Bottom Of The Bearing Plate To The Case As Well. Some Of This Will Depend On Manufacture Of Blower. Much Easier Say If You Are Using A Littlefield Blower With A Littlefield Bearing Plate. Good Luck

 

Actually it is a Littlefield Blower and bearing plate.
does anyone know of a Blower shop in or around the mid south or memphis area?

JS

 

The Best Just Told You What You Need Jr At Rbs He Can't Be Beat.

 

We Feel Jr Has Blower God Status