0il pan

Discussion in 'PSI Superchargers Tech Questions' started by carl, Jan 17, 2007.

  1. carl

    carl New Member

    Joined:
    Mar 26, 2005
    Messages:
    7
    Likes Received:
    0
    About A Year Ago I Bought An Oil Pan (moroso) Part Number 21330 It Is The Ultimate Ii Does Any Body Know The Capacity Of This Pan ? Moroso Said They Did Not Make This Pan In Quite A While And Could Not Supply The Information It Has An Odd Shape With No Dip Stick Provision May Be Some Body Has An Early Catalog Thanks
     
    #1
    Last edited: Jan 17, 2007
    carl, Jan 17, 2007
  2. Mike Canter

    Mike Canter Top Dragster
    Staff Member

    Joined:
    Mar 10, 2004
    Messages:
    4,630
    Likes Received:
    189
    Does it have a built in windage tray?
     
    #2
    Mike Canter, Jan 17, 2007
  3. carl

    carl New Member

    Joined:
    Mar 26, 2005
    Messages:
    7
    Likes Received:
    0
    Oil Pan

    Yes It Does It Looks Like One Of The Diamond Scrapers And It Includes A Crank Scraper And It Is For A Bbc AND I BELIEVE THE INSTRUCTIONS SAID IT SHOULD HAVE THREE EIGHTS OF AN INCH FROM THE CRANK SHAFT THANK YOU CARL
     
    #3
    Last edited: Jan 17, 2007
    carl, Jan 17, 2007
  4. Mike Canter

    Mike Canter Top Dragster
    Staff Member

    Joined:
    Mar 10, 2004
    Messages:
    4,630
    Likes Received:
    189
    I assume the is a wet sump....if so....Then the easiest way to figure out the capacity is with the pan off fill it with a measured amount of fluid until it comes up just below the windage tray and that is the pan capacity. To that amount add one quart additional for the filter and one quart for the oil galleries and lines and that should be close to your total amount.
     
    #4
    Mike Canter, Jan 18, 2007
  5. carl

    carl New Member

    Joined:
    Mar 26, 2005
    Messages:
    7
    Likes Received:
    0
    Thank You Carl
     
    #5
    carl, Jan 18, 2007

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM