camshafts sbc

Can someone let me know who is good with the cams on a blown sbc application.Rick

 

Personally i would call someone like Jeff Fowler 614-258-2924 or whom ever you like and be able to give them information on everything you have in the car including; flow numbers on the heads,compression ratio,rocker arm ratio, intake ,bore, stroke, rod length, blower size and type, transmission and type of car, and have one ground for you.

 

Nobody better in the biz than Rick or George Santos. S & S Automotive Ph. 510 357 9041. They were able to realize as much hp rom a small block as anyone. Brodix made special blocks and heads and they had their own custom pistons made, I believe at Brodix. They made soooo much hp that the cranks started to push out the main caps at 5.30 @ 255 with girdles and everything available at the time. Call Mike Miller at Stealth in Holt, Michigan. He bought all of Rick's stuff and George helped with the tune until they were comfortable with it. I saw dyno sheets with 2300 hp from 340 inches.

 

Sbc Cams

Rick Both Names Above Great People Also Try Brad At Doug Herberts He Is Extension #118 Lots Of Sbc Experience In The 2000hp Range.