460 ford timing cover for mechanical injection

Discussion in 'PSI Superchargers Tech Questions' started by RBS, Dec 24, 2005.

  1. RBS

    RBS Authorized Merchant

    Joined:
    May 6, 2004
    Messages:
    1,095
    Likes Received:
    0
    need to find a used or new timing cover to fit a 460 ford engine that has a provision to run mechanical fuel injection of the cam. it can be billet or cast. if you have one or a source to buy new ones please post with phone number thanks and happy holidays jr
     
    #1
  2. Mike Canter

    Mike Canter Top Dragster
    Staff Member

    Joined:
    Mar 10, 2004
    Messages:
    4,630
    Likes Received:
    189
    #2
  3. Chuck Stevens

    Chuck Stevens New Member

    Joined:
    Jul 7, 2004
    Messages:
    65
    Likes Received:
    0
    It's not hard

    to make an injector pump mount, using a flat plate on the stock front cover. We did it that way...years ago. NOW we use billet covers from B.F. Machine.
     
    #3
  4. Mike Canter

    Mike Canter Top Dragster
    Staff Member

    Joined:
    Mar 10, 2004
    Messages:
    4,630
    Likes Received:
    189
    Chuck, check your PM. Thanks
     
    #4
  5. RBS

    RBS Authorized Merchant

    Joined:
    May 6, 2004
    Messages:
    1,095
    Likes Received:
    0
    Ford Cover

    Hi Chuck Do You Have A Contact For The Cover You Speak Of Thanks Jr
     
    #5
  6. QtrWarrior

    QtrWarrior New Member

    Joined:
    May 28, 2005
    Messages:
    7
    Likes Received:
    0
    Gentlemen,

    Chuck (my Dad) is here in Ga for the Holidays. The info is back in Ca. he will post it after he gets home on Wednesday.

    Thanks, Mike Stevens
     
    #6
  7. Chuck Stevens

    Chuck Stevens New Member

    Joined:
    Jul 7, 2004
    Messages:
    65
    Likes Received:
    0
    BBF billet goodies

    Billy Frontuto, B.F.Machine, 1-626-330-4272, City of Industry, CA makes billet front covers with removable/changable sections in front of the cam gear and single or dual offset mag drives. The mag drives fit the stock distributor location and face the mag(s) to the left side.(opposite from Chrysler) Billy is an old Fuel Altered driver who was hurt when a wheel "went away in the lights". GREAT GUY!!
     
    #7

Share This Page